Sempatap “A” Primer is a water based primer for absorbent surfaces. If the plaster on your wall is very old and porous, apply a coat of Sempatap ‘A’ Primer and allow to dry. When applied to the internal surfaces of external walls, substantially lowers heat loss, dramatically reduces condensation and immediately makes rooms warmer and more comfortable. Can be decorated with virtually any finish – emulsion, wall- paper and it can even be tiled. It has been tested by the National Physical Laboratory and figures produced by the Building Research Establishment show considerable carbon saving.
|License:||For Personal Use Only|
|iPhone 5, 5S resolutions||640×1136|
|iPhone 6, 6S resolutions||750×1334|
|iPhone 7, 7 Plus, 8, 8 Plus resolutions||1080×1920|
|Android Mobiles HD resolutions||360×640, 540×960, 720×1280|
|Android Mobiles Full HD resolutions||1080×1920|
|Mobiles HD resolutions||480×800, 768×1280|
|Mobiles QHD, iPhone X resolutions||1440×2560|
|HD resolutions||1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original|
Fix the channel on the wall above the skirting using No Nails adhesive after preparation is completed and before application of Sempatap Adhesive. On the ceilings of flat roof extensions where there is little or no roof insulation.
Use for pre-treating highly absorbent surfaces, such as plaster, plaster boards, plywood, particle board, brick, concrete, cement screeds, wood, etc. Two tubes are needed per roll of Sempatap Thermal – Wallpaper. Add to Cart Add to Quote. Sempatap Edging Tape is made of a heavy cartridge paper, on one side of which is a plastic strip with a crease line through the. It can also be used surrounding tiles, plugs, switches etc. Mould growth on walls and ceilings must be treated first.
Simple and easy as wallpaper to apply. Use for taping joins, junctions, corners and edges to achieve a smooth professional finish, Use to cover all external corners, where Sempatap is used on walls and reveals.
It has been tested by the National Physical Laboratory and figures produced by the Building Research Establishment show considerable carbon saving.
Sempatap Thermal Application Instructions. Sempatap Thermal is 10mm thick, specifically developed as solid wall insulation and has been in use in the UK and Europe for over 30 years successfully installed in 1,s of flats and houses by Local Authorities, Housing Associations, private Landlords and homeowners.
If your skirting is less than 10mm wide on the top edge you will need Sempatap Skirting Channel which is a white plastic track and will give a neat finish to the bottom edge of Sempatap Thermal. Sempatap Thermal Adhesive has been specifically designed for installation of Sempatap Thermal solid wall insulation rolls also available in Insulation Shop London.
10mm Sempatap Thermal Solid Wall Insulating Wallpaper
Does not reduce the room size significantly, there is therefore no need to re-site and extend electrics and plumbing or reduce and refit floor coverings.
In any type of xolid wall house including solid brick, solid stone, concrete, on cavity wall flats and houses, particularly north east facing sollid. Can be decorated with virtually any finish – emulsion, wall- paper and it can even be tiled. Latex foam with coated woven fibreglass face.
It has thetmal life expectancy of 30 years and can be redecorated time and time again with no problem. Terms and conditions apply. If the plaster on your wall is very old and porous, apply a coat of Sempatap ‘A’ Primer and allow to dry. To the internal face of the external walls of a property, it is not necessary to apply the insulation to internal party walls.
It is a remarkable thermal insulation which, when applied inside the property on the external insulatuon, substantially reduces heat loss making rooms immediately feel warmer. One 5L tube is needed per roll of Sempatap Thermal. Saves money in the long run. Only apply the adhesive to one drop length area at a time. For alleviating cold bridge inaulation caused by cantilever beams with walkways, ring beams, balconies and bridging from Finlock gutters.
When applied to the internal surfaces of external walls, substantially lowers iinsulation loss, dramatically reduces condensation and immediately makes rooms warmer and more comfortable. Sempatap Spatula is a plastic spatula for applying, smoothing out and firming up Sempatap, Sempatap Thermal and Sempafloor. Remove any wallpaper and prepare the walls and ceilings.
Sempatap – Greenspan System Sales Ireland Ltd.
It is in an open and closed cellular inaulation, which allows the substrate to breathe. Sempatap wallpaper rolls are 1 metre wide and Terms and conditions appl.
It is often referred to as magic wallpaper, insulated wallpaper or flexible insulating lining. Sempatap “A” Primer is a water based primer for absorbent surfaces. The adhesive is water-based, therefore there are no nasty smells.