Natural Paint Natural Flat is a natural, breathable water based interior paint, formulated without petrochemicals. Previously Painted Surfaces in Unsound Condition Due to the high film thickness and the flat mottled appearance of Murobond, filling is not normally necessary to achieve satisfactory results. Second Finish Coat The surface should be dampened immediately prior to application. View Details Read more. Murobond Substrate Preparation and Priming.

Name: Kajitaur
Format: JPEG, PNG
License: For Personal Use Only
iPhone 5, 5S resolutions 640×1136
iPhone 6, 6S resolutions 750×1334
iPhone 7, 7 Plus, 8, 8 Plus resolutions 1080×1920
Android Mobiles HD resolutions 360×640, 540×960, 720×1280
Android Mobiles Full HD resolutions 1080×1920
Mobiles HD resolutions 480×800, 768×1280
Mobiles QHD, iPhone X resolutions 1440×2560
HD resolutions 1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original

Following preparation of substrates as previously outlined Murobond Cement paint is applied as follows:.

Stockists – Murobond Superior Paints

It should only be used as an additive to Murobond. If the joints are sealed prior to painting, Murobond should not be applied over these joints. Light dampening of surface prior to the application of the first coat of Murobond may be required to ease the spreading over AAC. Highly porous block or brickwork eg AAC and non porous block or brickwork eg dense extruded bricks and concrete, should be first coated with a liberal application of Murobond Sealer applied directly from the tin to dry clean surface by brush, roller or spray at a rate of approximately 6 sq.

The mixed Murobond paint is applied by brush in a random pattern at a rate of approximately 6 sq. With rich, moody colours and soft shades that age beautifully to a matt patina, Murobond cement paint is the ultimate combination of aesthetic appeal and longevity. Previously Painted Surfaces with a Lime Based Coating The surface should be inspected to ensure that it is properly adhering, free of oils, grease, loose particles, dirt, efflorescence, mould, moss or other foreign matter.


This water based formulation is very low VOC, non-yellowing and low odour. Internally sealing is not generally required. We recommend colouring with Murobond Natural Earth Pigments, although universal colourants may be used. Cement Paint is a factory tinted product. Pentimento limewash gives a subtle, mottled patina and its ability to offer unique and individual results makes it a favourite with decorators and renovators.

The addition of clean sand to the mix creates an effect similar to bagging, reducing the visual impact of the jointing.

Mink – Murobond Superior Paints

The paints exceptionally resilient formula was developed with protection and performance in mind, making Murobond a wonderful way to enhance cement render, bagging, brickwork or any dimensionally stable surface. Murobond Substrate Preparation and Priming.

This super tough, all purpose paint can be wiped clean without fuss. Read Moreā€¦ Woodwash A soft translucent woodwash reminiscent of Scandinavian limed timber.

This incredibly versatile paint can be used both internally and externally. Plaster board joints and nail heads must be spot primed with Murobond Primer.

If a smooth flat appearance is required some filling may be necessary. Any lime remaining must be firmly bound. Sand can be added to the Murobond mix in the ratio of 3 parts powder, up to 1.

Priming Murobond is a moisture cured product, therefore it is important to ensure an evenly porous surface before applying Murobond.


Murobond Cement Paint

The surface should be dampened immediately prior to application. To reduce this risk check weather reports, ensure thick film and mist spraying. Previously Painted with an Oil-based Paint Sand or chemically etch shiny surfaces to ensure adhesion and apply one coat of Murobond Primer.

Different amounts may be used in each coat with the umrobond amount typically being used in the second coat. Mist spraying internally is not necessary. It is recommended that large areas be divided by false expansion joints to reduce the working area to an area easily manageable by a contractor generally about 3m high by m long. To aid the setting of Murobond it is important to lightly mist spray the painted surface with water three to four hours after the application of each coat.

Murowash offers a finely grained, streak free flat finish with subtle colour variations. WSC is typically used in the final coat of Murobond only, however its use in both coats is beneficial in extreme situations or for single skin construction. ,urobond Render, Bagged Masonry, AAC, Clay or Concrete Bricks or Blocks The surface should be inspected to ensure that it is properly adhering, free of oils, grease, loose particles, dirt, efflorescence, mould, algae, moss or other foreign matter.

The thickness of the applied film is critical to cure and performance.